Load Photo Or Photo L Paper In Photo Bypass Tray - Brother MFC-J491DW Online User's Manual

Home > Paper Handling

Load Photo or Photo L Paper in Photo Bypass Tray

Related Models: MFC-J690DW
Use the photo bypass tray, which is located on the top of the output paper tray cover, to print on Photo (4" x
6")/(10 x 15 cm) or Photo L (3.5" x 5")/(89 x 127 mm) size paper.
• In Canada, the photo bypass tray is called the photo paper tray.
• When you use the photo bypass tray, you do not have to remove the paper from the tray beneath it.
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message
appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size
and Paper Type settings if needed, following the LCD instructions.
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2. Pull the paper tray completely out of the machine.
3. Press the blue photo bypass tray release button (1) and slide the whole output paper tray cover forward until
it locks into the photo printing position (2).
2
4. Load up to 20 sheets of Photo or Photo L paper in the photo bypass tray with the printing surface face down.
Loading more than 20 sheets of photo paper may cause paper jams.
> Load Paper > Load Photo or Photo L Paper in Photo Bypass Tray
1
2
1
40