Brother MFC-J491DW Online User's Manual page 248

Home > Fax > Voice Operations and Fax Numbers
Send Tone Signals
If you have a Pulse dialing service, but must send Tone signals (for example, for telephone banking), follow these
steps. If you have a Touch Tone service, you will not need this feature to send tone signals.
This feature is available only in Canada.
>> MFC-J491DW/MFC-J497DW
>> MFC-J690DW/MFC-J895DW
MFC-J491DW/MFC-J497DW
1. Press Hook.
2. Press # on the machine's control panel. Any digits dialed after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialing service.
MFC-J690DW/MFC-J895DW
1. Press
[Fax].
(MFC-J895DW)
If [Fax Preview] is set to [On], press
2. Press [Hook].
3. Press # on the machine's control panel. Any digits dialed after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialing service.
Related Information
• Voice Operations
> Voice Operations
[Fax] > [Sending Faxes].
> Send Tone Signals
241