Table of Contents
Advertisement
KMT21P
10. TEChNICAL SPECIfICATIoNS
Power handling
Max power
Impedance
Frequency range (-10 dB)
SPL 1W/1mt
Maximum SPL
Horizontal
Vertical
Frequency
Connectors
Wiring
Dimensions
Weight
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ standard
2. With dedicated preset;
3. Measured @4 mt then scaled @1 mt;
4. Measured with musical signal
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
1600 W
2800 W
(1)
4 Ω
30 Hz – 150 Hz
(2)
98 dB
(3)
130 dB (cont.) – 136 dB (peak)
COVERAGE
omni
omni
CROSSOVER
Type
External crossover required
Low pass @ 150 Hz
(maximum - preset dependent)
TRANSDUCERS
1 X 21" Neodymium magnet woofer
Type
with 4" voice coil
POWER AUDIO INPUT
2 x NL4 Speakon connectors
1+ 1- (signal IN & LINK); 2+ 2- (through)
PHYSICAL
55.5 cm x 55.5 cm x 76.3 cm
(21.9" x 21.9" x 30.0")
44.5 kg (98.1 lbs)
(4)
Ver. 1.3
10
Advertisement
Table of Contents
Need help?
Do you have a question about the KMT21P and is the answer not in the manual?
Questions and answers