Technical Specifications - K-array Thunder-KMT218P User Manual

KMT12P

10. TECHNICAL SPECIFICATIONS

Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ standard
2. With dedicated preset;
3. Measured @4 mt then scaled @1 mt;
4. Measured with musical signal
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
Power handling 1600 W
Max Power 2800 W
4 Ω
Impedance
Frequency range (-10 dB) 30 Hz – 150 Hz
SPL 1W/1mt 101 dB
Maximum SPL 133 dB (cont.) – 139 dB (peak)
COVERAGE
Horizontal omni
Vertical omni
CROSSOVER
Type External crossover required
Low
Frequency
(maximum - preset dependent)
TRANSDUCERS
2 X 18" Neodymium magnet woofer
Type
with 3" voice coil
POWER AUDIO IN/OUT
Connectors 2 x 4 pin Speakon
Wiring 1+ 1 -(signal IN & Link); 2+ 2- (through)
RECOMMENEND AMPLIFIERS
Type KA84, KMT218
PHYSICAL
94.9
Dimensions
(37.4" x 18.9" x 23.6")
Weight 49.0 kg (108.03 lbs)
(1)
pass @ 150 Hz
cm x 48.0 cm x 60.0 cm
Ver. 1.2
10