Technical Specifications - K-array KU44 User Manual

KU44

11. TEChNICAL SpECIFICATIONS

Power handling
Impedance
Frequency range (-10 dB)
SPL 1W/1mt
Maximum SPL
Horizontal
Vertical
Frequency
Connectors
Wiring
Dimensions
Weight
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
2 x 60 W
8 / 32 Ω selectable (2 x 16 Ω)
50 Hz – 150 Hz
84 dB
(2)
110 dB (cont.) – 116 dB (peak)
COVERAGE
omni
omni
CROSSOVER
Type External crossover required
Low pass @ 150 Hz
TRANSDUCERS
Type 2 x 4" neodymium magnet woofers with 1" voice coil
Type 2 x 4" passive transducer
POWER AUDIO IN/OUT
1 x 4-pin phoenix connector
Serial or parallel
RECOMMENDED AMPLIFIERS
Type KA14, KA24
CERTIFICATION
IP 54 (Full water protection with K-KUIP4 acessory)
PHYSICAL
11.6 cm x 50.0 cm x 10.1 cm (4.6" x 19.7" x 4.0")
5.9 kg (13.0 lbs)
Notes for data
1. With dedicated preset;
2. Measured @4 mt then scaled @1 mt;
3. Measured with musical signal
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
(1)
(3)
Ver. 1.1
13