Table of Contents
Advertisement
7 Software
The calibration values of the FPN calibration are not stored with UserSetSave (or
CameraHeadStoreDefaults). Use the command Correction_SaveToFlash for this (see
Correction_SaveToFlash).
7.6 Persistent IP address
It is possible to set a persistent IP address:
1.
Set GevPersistentIPAddress (in category TransportLayerControl) to the desired IP address.
2.
Set GevPersistentSubnetMask (in category TransportLayerControl) to the sub net mask.
3.
Set GevCurrentIPConfigurationPersistent (in category TransportLayerControl) to True.
4.
Set GevCurrentIPConfigurationDHCP (in category TransportLayerControl) to False.
5.
The selected persistent IP address will be applied after a reboot of the camera.
.
82 of 103
MAN066 12/2018 V1.1
Advertisement
Table of Contents
