Elitegroup Computer Systems Z170-LIGHTSABER User Manual page 65

Strong Weak Leaker (7)
Use this item to set the strong weak leaker value.
Memory Scrambler (Enabled)
This item allows you to enable or disable the memory scrambler.
Force Single Rank (Disabled)
Use this item to enable or disable the force single rank.
Memory Remap (Enabled)
This item allows you to enable or disable the memory remap above 4G.
Fast Boot (Enabled)
This item allows you to enable or disable the fast boot.
DLL Weak Lock Support (Enabled)
This item allows you to enable or disable the DLL weak lock support.
Memory Thermal Management (Disabled)
This item allows you to enable or disable the memory thermal management.
DDR PowerDown and idle counter (BIOS)
This item allows you to BIOS or PCODE the DDR Power Down and idle counter. BIOS:
BIOS is in countrol of DDR CKE mode and idle timer value. PCODE: pcode will
manage the modes.
REFRESH_2X_MODE (Disabled)
This item allows you to enable or disable 2xRef when warm and Hot 2-iMC enables
2xRef when Hot.
SelfRefresh Enable (Enabled)
Use this item to enable or disable the SelfRefresh.
Press <Esc> to return to the M.I.B. X Menu page.
Z170-LIGHTSABER USER MANUAL
58