The Boot Menu - General Dynamics Itronix GD8200 User Manual

GD8200 User Guide GD8200 User Guide GD8200 User Guide
Field
System Agent (SA)
Configuration
PCH-IO Configuration

The Boot Menu

Use these fields to set the devices from which the
system should boot, in order of priority, depending
on your configuration. The boot device fields are
dynamic and change depending on the devices
installed on your GD8200 during that boot sequence.
For example, if you have a DVD/CDRW Combo drive
or a USB floppy drive installed, they appear as options
in the boot device fields. If you only have a hard disk
drive, it will be the only option that displays.
When you select a device, it is disabled in the other
boot device fields.
Field
Setup Prompt Timeout
Bootup NumLock State
Quiet Boot
GateA20 Active
Option ROM Messages
Interrupt 19 Capture
Boot Option #1
Boot Option #2
General Dynamics Itronix 72-0146-001
Setting Description
Sub-menu
Sub-menu
Setting
E -
NTER TIMEOUT IN SEC
ONdS
On
O
FF
E
NABlEd
Disabled
U R
pON EqUEST
Always
F B
ORCE IOS
Keep Current
Enabled
d
ISABlEd
p1: dv-W28SS-R
PO: TOSHIBA MK5061G-
SYN
Disabled
P1: DV-W28SS-R
pO:TOShIBA
Mk5061GSyN
Disabled
Description
Number of seconds to wait for the setup activation key.
Select the keyboard NumLock state.
Enables or disables Quiet Boot option.
UPON Request - GA20 can be disabled using BIOS services.
ALWAYS - do not allow disabling GA20; this option is useful when an
RT code is executed above 1MB.
Set display mode for Option ROM.
Enabled: Allows Option ROMS to trap Int 19.
Sets the system boot order.
Sets the system boot order.
Customizing Your BIOS