Pch-Fw Configuration - General Dynamics Itronix GD8200 User Manual

GD8200 User Guide
Field
TPM Support
TPM State
Pending TPM Operation
TPM Enabled Status
TPM Active Status
TPM Owner Status

PCH-FW Configuration

The PCH-FW Configuration is used to configure
Management Engine technology parameters.
Field
ME FW Version
ME Firmware Mode
ME Firmware Type
ME Firmware SKU
Firmware Update
Configuration
General Dynamics Itronix 72-0146-001
Setting Description
Enables Trusted Platform Module (TPM) support. Operating system will
Enable
d not show TPM. Reset of platform is required.
ISABlEd
Enable Enables or Disables the TPM module.
d
NOTE: Computer will reboot during restart in order to change the State of
ISABlEd
TPM.
None Displays any pending TPM operation.
None Displays the TPM Enabled Status.
None Displays the TPM Active Status.
None Displays the TPM Owner Status.
Setting Description
None Displays the Firmware Version
None Disables the Firmware Mode
None Displays the Firmware Type
None Displays the Firmware SKU
Sub-menu Provides the user with the ability to update the firmware configuration.
Customizing Your BIOS