Table of Contents
Advertisement
GD8200 User Guide
Auto Dim Feature
To save the battery power, your computer automatically dims
the display when the computer is not attached to external
power.
NOTE
You may still use the display brightness function keys
(FN+F6
and FN+F7) to adjust display brightness.
See
Managing Power
for more information on power
management features.
Simultaneous or Extended Display
This computer supports simultaneous LCD and external
display output via the external monitor port located on the
back edge of the computer. You can also connect other
output display devices such as LCD projection panels for large
audience presentations. See
Video Device
for more information.
FEATURE
When using an external monitor you can extend
your desktop. This allows you to open and view one program
on the external monitor while viewing a different program on
your laptop's display.
Windows
7:
®
1.
Select
Start, Control Panel, Appearance and Personaliza-
tion
.
2.
Under
Display
select
Connect to an external display
3.
Select the drop-down menu next to
click
Extend these displays
LCD Heater
The GD8200 has a CCFL heater to improve display brightness
in a cold environment. The heater includes a film and heater
strip that is bonded over the CCFL area of the display. It is
designed to turn on when the temperature is cold enough
to impact display brightness and does not require user
intervention.
Cursor Visibility
To improve the visibility of the mouse cursor, you should:
Pointer Trails
Enable the "
„
Use a slow or medium speed/sensitivity level
„
You can combine a higher level of acceleration with a slow
or medium speed/sensitivity level. This allows you to move
the mouse cursor quickly by increasing your finger pressure,
while still providing a finer degree of control when you apply
minimum pressure.
NOTE
To change the speed of the mouse, do the following:
General Dynamics Itronix 72-0146-001
Attaching an External Monitor or
Multiple Displays
. Then click
OK
.
" feature to add trailing cursors
Getting Familiar With Your Computer
Windows
7:
Select Start, Control Panel, Hardware and Sound,
®
and then choose Mouse. On the Mouse Properties window,
select the Pointer Options tab to make cursor visibility adjust-
ments.
Lid Switch
Your computer has a lid switch that can automatically suspend
and resume your computer when you close and open the
display. To change the power management settings for the lid
switch, perform the following:
Windows
7:
®
1.
On the System Tray area of the Taskbar, right-click the
icon
.
2.
At the top of the grid, select the appropriate
3.
Select the desired action settings for both battery or AC power.
4.
In the
Power buttons and lid
tion
and
Lid Close Action
5.
Save Changes
Select
power plan settings you wish to modify.
NOTE
The Lid Close Action default is Sleep for Windows
default Lid Open Action is Do Nothing.
.
and
Power
section, select the
Lid Open Ac-
.
and repeat steps 2 through 4 until all
DynaPower
plan.
®
7. The
Advertisement
Table of Contents
