Table of Contents
Advertisement
GD8200 User Guide
Hibernate
Hibernate, or Suspend to Disk, is similar to Standby except
the current state of the computer is copied to the hard disk in
a special file. Then, all devices in the computer are turned off.
When the computer returns from hibernation, the desktop
appears with the same files and programs open as when the
computer was suspended. Hibernation saves more power than
Standby, but takes slightly longer to resume.
Windows
7: On the System tray area of the Taskbar, right click
®
the DynaPower icon, then select DynaPower Grid and make
your desired changes.
Power Off
All applications are closed and the system shuts down. To
power off the computer select Start, Shut Down, Shut down.
Then click OK.
Battery Tips
Tip 1. Avoid excessive heat and cold
Your battery will last longer during the day if it is used, charged
„
and stored between 50°F and 86°F (10°C and 30°C).
Charge the battery nightly where the temperature will remain
„
around 68°F (20°C). Your battery may not last as long through
the day if you charge it at higher or lower temperatures.
Allow unrestricted airflow while the computer is connected
„
to external power. Make sure that the fan inlet and outlet are
unobstructed.
Avoid exposure to extreme temperatures for long periods as this
„
can shorten battery charge life or damage the battery.
How your battery behaves in warm conditions
To prevent possible battery damage, the system may not allow a
„
charge if the battery temperature is above 122°F (50°C), such as
in a closed, unattended vehicle during the summer. In this case,
Battery Power Indicator
the
has stopped charging your battery; however, your battery may
not be fully charged.
If possible, turn off or suspend your computer while the battery
„
is charging in a warm environment to avoid over-heating.
In warmer temperatures, your battery may take much longer to
„
fully charge.
How your battery behaves in cold conditions
When using a battery in cold conditions, the battery capacity
„
may drain significantly faster than normal.
To prevent possible battery damage, the system will not allow a
„
charge if the battery temperature is below 41°F (5°C), such as in
a closed, unattended vehicle during the winter. In this case, the
Battery Power Indicator
General Dynamics Itronix 72-0146-001
may indicate the computer
may indicate the computer has
Operating with Battery Power
stopped charging your battery; however, your battery may not be
fully charged.
In cooler temperatures, your battery can take much longer to
„
fully charge.
Tip 2. Prevent wasted power
Manually turn off or suspend your computer whenever you are
„
not using it.
Reduce the screen brightness. Decrease brightness by pushing
„
FN + F6.
Increase it by pushing
automatic dimming feature
Enable the display's
„
Use the AC adapter or vehicle adapter whenever possible.
„
To help save power, use the DynaPower utility.
„
When running on battery power, make sure your system
„
suspends automatically after a few minutes of inactivity. PC
Cards, radios, custom applications, or modified system settings
may affect battery power.
Remove PC Cards and unplug peripherals when you are not
„
using them. They may draw power from the system even when
not in use.
Avoid operating the fax/modem, or audio and video applications
„
when using battery power. Operating a fax/modem, video, or
audio equipment increases the computer's power requirements.
Don't use screen savers as they draw excessive current,
„
especially "3D" screen savers.
Turn off the Wireless LAN when not using it. Turning on the
„
Wireless LAN increases the computer's power requirements.
Avoid or minimize using applications that keep the CPU busy a
„
large percentage of the time. The following items will help you
determine if your system is running such applications.
Identifying power wasting programs
To determine if applications or processes are keeping the CPU
busy:
1.
Task Manager
Start the
Manager
, right-click an empty space on the taskbar, and then
Task Manager
click
.
2.
Performance
Select the
tab to view running applications, and
Process
the
tab to view running processes.
3.
Watch the CPU ssage. It is okay if the processor usage is
occasionally 100 percent, but if it is 100 percent most of the
time, this may indicate a problem.
What to do if applications are keeping the CPU busy
If possible, close applications that keep the CPU busy when you
„
are not using them.
Turn off or suspend your computer whenever you are not using
„
it. This will help to conserve power.
FN + F7.
.
Windows
Task
utility. To open
®
Advertisement
Table of Contents
