Gt-Sliced Vr Settings - Supermicro C7Z170-SQ User Manual

Supermicro C7Z170-SQ Motherboard User's Manual
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or
a negative (-) number. The default setting is "+".
GT Unslice Domain
GT OverClocking Frequency
This option selects the Overclocked RPO frequency in multiples of
50MHz. The default is 0.
GT Voltage Mode
Use this feature to select the Overclocking GT mode. The options are
Adaptive and Override.
GT Extra Turbo Voltage
Use this feature to set the extra voltage applied while GT is operating
in turbo mode. Specify a value from 0mV to 2000mV. Enter 0 to use
the manufacture default value.
GTU Voltage Offset
Use this feature to set the GT Adaptive voltage Target(mV) value from
0mV to 2000mV. Enter 0 to use the manufacture default value.
Offset Prefix
Use this feature to set the Offset value as a positive (+) number or
a negative (-) number. The default setting is "+".

GT-Sliced VR Settings

VR Config Enable
Select Enable to activate VR configuration options. The options are
Disabled and Enabled.
AC Loadline
AC Loadline is defined in 1/100 mOhms and uses the BIOS mailbox
command 0x2. A value of 100 equals 1.0 mOhm, and 1255 is 12.55
mOhms. Valid range is 0-6249 (0-62.49 mOhms). Enter 0 for AUTO.
DC Loadline
DC Loadline is defined in 1/100 mOhms and uses the BIOS mailbox
command 0x2. A value of 100 equals 1.0 mOhm, and 1255 is 12.55
mOhms. Valid range is 0-6249 (0-62.49 mOhms). Enter 0 for AUTO.
4-50