Algorithm
Select either One-Time or Periodic for HDCP re-encryption flow.
PM Support
Activating this feature will enable Power Management BIOS support. The
options are Enabled and Disabled.
PAVP Enable
Use the feature to enable Protect Audio Video Path Mode. The options
are Enabled and Disabled.
Cdynmax Clamping Enable
Enable this option to activate Cdynmas Clamping. The options are En-
abled and Disabled.
Cd Clock Frequency
Use this feature to set the highest Cd clock frequency. The options are
337.5MHz, 450MHz, 540MHz, and 675MHz.
Graphics OverClocking
GT Slice Domain
GT OverClocking Frequency
This option selects the Overclocked RPO frequency in multiples of
50MHz. The default is 0.
GT Voltage Mode
Use this feature to select the Overclocking GT mode. The options are
Adaptive and Override.
GT Extra Turbo Voltage
Use this feature to set the extra voltage applied while GT is operating
in turbo mode. Specify a value from 0mV to 2000mV. Enter 0 to use
the manufacture default value.
GT Voltage Offset
Use this feature to set the GT Adaptive voltage Target(mV) value from
0mV to 2000mV. Enter 0 to use the manufacture default value.
4-49
Chapter 4: AMI BIOS