Supermicro C7Z170-SQ User Manual page 29

Connector
I/O Back Panel
Audio FP
Battery
COM1
Fan 1,2,3,4,5
JD1
JF1
JL1
JLED1
JPW1
JPW2
JSD1
JSPDIF_OUT
JSTBY1
SP1
I-SATA0~5
USB 2/3, 4/5
USB 9/10 (3.0)
USB 11/12 (3.0)
OC FRONT PANEL
PCI-E M.2 CONNECTOR
LED Description
LED1 Onboard Standby PWR LED
LED2 M.2 LED
LED4 Status Display
*Download the AMI status codes at https://www.supermicro.com.tw/manuals/other/AMI_BIOS_POST_
Codes_for_Grantley_Motherboards.pdf.
See Back Panel I/O Connectors
Front Panel Audio Header
Onboard Battery
COM1 Port Header
System/CPU Fan Headers (Fan1: CPU Fan)
Speaker/buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)
Front Panel Control Header
Chassis Intrusion Header
Power LED Indicator Header
24-pin ATX Main Power Connector (Required)
+12V 8-pin CPU power Connector (Required)
SATA DOM (Disk On Module) Power Connector
Sony/Philips Digital Interface (S/PDIF) Out Header
5V Standby Power Header
Internal Speaker/Buzzer
(Intel Z170) Serial ATA (SATA 3.0) Ports 0~5 (6Gb/sec)
Front Panel Accessible USB 2.0 Headers 2/3, 4/5
Front Panel Accessible USB 3.0 Header 9/10
Front Panel Accessible USB 3.0 Header 11/12
Header for the Overclocking Control Panel
PCI-E M.2 Connector for memory cards, wireless adapters, etc.
Color/State
Green: Solid on
Green: M.2 on board
Digital Readout
1-11
Chapter 1: Introduction
Description
Power On
M.2 on board
Download the status
codes below*
Status