Graphics Configuration
Graphics Turbo IMON Current
Use this feature to set the limit on the current voltage regulator. Valid
range is 14-31. Default is 31.
Skip Scanning of External Gfx Card
Use this feature to scan for External Gfx Card on PEG and PCH PCIE Ports.
If this feature is enabled, the system will not scan for a new card. The
options are Disabled and Enabled.
Primary Display
Use this feature to select the graphics device to be used as the primary
display. Select from IGFX/PEG/PCI or select SG for switchable GFX. The
options are Auto, IGFX, PEG, PCI, and SG.
Select PCIE Card
Use this feature to select either Elk Creek 4, PEG Eval, or Auto, to be
used on the platform.
External Gfx Card Primary Display Configuration
Primary PEG
This feature allows the user to select the primary PCI Express Graphics
(PEG) slot. The options are Auto, PEG11, and PEG12.
4-47
Chapter 4: AMI BIOS