Table of Contents
Advertisement
Chapter 4: BIOS
Graphics Configuration
Primary Display
Use this feature to select the graphics device to be used as the primary display. The options
are Auto, PEG, and PCIE.
Primary PEG
This feature allows the user to select the primary PCI Express Graphics (PEG) slot. The
options are Auto, PEG11, and PEG12.
Primary PCIE (PCI-Express Graphics)
This feature allows the user to specify which graphics card to be used as the primary
graphics card. The options are Auto, PEG1, PEG2, PEG3, PEG4, PEG5, PEG6, PEG7,
PEG8, PEG9, PEG10, PEG11, PEG12, PEG13, PEG14, PEG15, PEG16, PEG17, PEG18,
and PEG19.
DMI/OPI Configuration
The following DMI information will display:
•
DMI
DMI Vc1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled.
DMI Vcm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are Enabled
and Disabled.
Program Static Phase1 Eq
Use this feature to configure the De-emphasis control on DMI. The options are Disabled
and Enabled.
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA (System
Agent) side of the DMI Link. The options are Disabled and L1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enabled and Disabled.
81
Advertisement
Table of Contents
