Olivetti d-COLORP2230 Operation Manual page 232

Appendix > Optional Equipment
(7) Wireless Network Interface Kit (IB-36)
This is a wireless LAN Interface card which supports the wireless LAN specifications IEEE802.11n (Max 65 Mbps) and
11 g/b. In addition, network printing is possible without using the wireless LAN router because Wi-Fi Direct is supported.
(8) Data Security Kit(E) "Data Security Kit"
The Data Security Kit overwrites all unnecessary data in the storage area so that it cannot be retrieved. The Data
Security Kit encrypts data before storing it in the SSD. It guarantees higher security because no data cannot be decoded
by ordinary output or operations.
(9) UG-33 "ThinPrint Option"
This application allows print data to be printed directly without a print driver.
4
Insert the SD/SDHC memory card into the SD/SDHC memory card slot.
5
Replace the covers and close the rear cover.
6
Insert the power cord into the socket and turn on the power switch.
7
Format the SD/SDHC memory card from the operation panel.
For the procedure for formatting, refer to the following:
SD Card (page 7-21)
10-5