Table of Contents
Advertisement
Troubleshooting > Troubleshooting
Symptom
The color toner is empty.
The machine is emitting
steam in the area around the
paper ejection slot.
Checkpoints
Do you want to continue printing in black
and white?
Check the room temperature to see if it
is low, or if damp paper was used.
Corrective Actions
If the black toner is remained, the
machine continues printing in black and
white by selecting [Print in B & W] of
[ColorToner Empty].
Depending on the printing environment
and the paper's condition, the heat
generated during printing will cause the
moisture in the paper to evaporate, and
the steam emitted may look like smoke.
This is not a problem, and you can
continue printing. If the steam concerns
you, raise the room temperature, or
replace the paper with a newer, dryer
paper.
9-12
Reference
Page
page 7-21
―
Advertisement
Table of Contents
Troubleshooting
