Olivetti d-COLORP2230 Operation Manual page 158

Setup and Registration (System Menu) > System Menu
Buzzer
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Buzzer] > [►] key
Set options for buzzer sound during the machine operations.
Item
Key Confirmation
Job End
Ready
Error
RAM Disk Mode
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [RAM Disk Mode] > [OK] key
Item
RAM Disk Mode
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
SSD
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [SSD] > [►] key
Format an optional SSD.
When an optional SSD is inserted into the printer for the first time, it must be formatted before use.
IMPORTANT
Formatting will destroy any existing data on a storage device including a used SSD.
NOTE
This function will not be displayed when the optional Data Security Kit is installed.
Emit a sound when a key is selected on the operation panel.
Value: On, Off
Emit a sound when a print job is normally completed.
Value: On, Off
Emit a sound when the warm-up is completed.
Value: On, Off
Emit a sound when errors occur.
Value: On, Off
A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Mode: On, Off
RAM Disk Size: The setting range varies depending on the amount of memory installed
and the option memory usage setting.
7-20
Description
Description