Brother HE-800C Instruction Manual page 45

No.
05
Cutter Y space
06
Cutter operation (*2)
1:
07
Zigzag pitch
08
Zigzag width
09
Zigzag width ratio (at left) (*3)
10
Slow
Sewing speed for 1st stitch
11
start
Sewing speed for 2nd stitch
12 (*4)
Sewing speed for 3rd stitch
13
Sewing speed for 4th stitch
14
Underlay speed (*5)
15
Sewing speed (zigzag part)
16
Rear tack speed (*5)
17
Front tack speed (*5)
(*2) Cutting before sewing is enabled only when underlays or 2-cycle sewing exist. In other cases, cutting during sewing will be
enabled.
(*3) The zigzag width ratio will be 50% regardless of the setting value for eyelet types.
(*4) If underlays exist and the setting speed exceeds the underlay speed, the speed during sewing will equal the underlay
speed.
If underlays do not exist and the setting speed exceeds the sewing speed (zigzag part), the speed during sewing will equal
the sewing speed (zigzag part).
(*5) If the setting speed exceeds the sewing speed (zigzag part), the speed during sewing will equal the sewing speed (zigzag
part).
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
Setting items
2: 3: 4:
Setting range
0.000–2.000 mm
1: Cutting during sewing
Operates when the front
tack of the last cycle is
sewn (standard)
2: Cutting after sewing
Operates when sewing is
finished and material is
feeding.
3: Cutting before sewing
Operates immediately
before the left zigzag stitch
of the last cycle is sewn.
4: Cutting before sewing +
Cutting during sewing
Operates twice:
immediately before the
left zigzag stitch of the
last cycle is sewn and
when the front tack of the
last cycle is sewn
However, 3 and 4 are only
valid for two cycles or more.
0.20–2.50 mm
1.00–3.00 mm
30–70%
500–4,000 sti/min
500–4,000 sti/min
500–4,000 sti/min
500–4,000 sti/min
500–4,000 sti/min
1,000–4,000 sti/min
500–4,000 sti/min
500–4,000 sti/min
HE-800C
Unit Initial value
0.025 1.000
1 1
0.05 0.35
0.05 1.50
1 50
100 500
100 500
100 1,200
100 3,000
100 2,000
100 3,600
100 4,000
100 4,000
36