Setting Memory Switches - Brother HE-800C Instruction Manual

7-2. Setting memory switches

The functions of the operation panel include some that are set by memory switches at the time of shipment from the factory.
You can change the settings for these memory switches if required. The settings for the memory switches are valid for all
programs. Refer to "7-2-1. List of memory switch settings" for details on memory switch Nos. and settings.
1
Press the MEMSW key.
4229B
2
Select the memory switch (1) that you would like to change the setting for.
4787M
3
Change the setting value (3).
4792M
4
Apply the changed setting.
4212B
5
To change the settings for other memory switch Nos., repeat the operations in steps 2 - 4 above.
6
Press any one of the following four keys to exit memory switch mode.
4230B
7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)
HE-800C
(1) Memory switch number
(2) Setting for selected number
(3) Setting range
* When the setting value is changed, (3) will start flashing.
* If you would like to return the setting to the default value,
press the RESET key.
* The setting for the memory switch will be stored and (3)
will stop flashing and illuminate steadily.
4923M
4924M
4925M
4925M
56