Table of Contents
Advertisement
3.6 Connection with a FlexPDU (Power Distribution Unit) module (optional)
5PX
FlexPDU
25
3.7 Connection with a HotSwap MBP module (optional)
The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connected
loads (HotSwap function).
5PX
HotSwap MBP
28
614-03797-00_EN
26
27
32
33
29 30 31
34
3. Installation
1. Connect the UPS powercord
to the AC-power source.
2. Connect the input cord of the
FlexPDU module
to one of
27
the UPS outlets
.
9
The cable and the connectors are
marked in red.
3. Connect the equipment to the
outlets
and
on the FlexPDU
25
26
module. These outlets differ,
depending on the version of the
FlexPDU module.
1. Connect the input socket
the HotSwap MBP module to the
AC-power source.
2. Connect the UPS input socket
to the "UPS Input"
10
33
HotSwap MBP module.
This cord and the receptacle are
marked blue.
3. Connect the UPS outlet
"UPS Output"
of the HotSwap
32
MBP module.
This cord and the outlet are
marked red.
4. Connect the equipment to the
outlets
on the HotSwap MBP
28
module.
These outlets differ, depending on
the version of the HotSwap MBP
module.
Caution: Do not use UPS outlets
and
to supply equipment because
9
use of switch
on the HotSwap
31
MBP module would cut supply to
the equipment.
10
on
34
of the
to the
7
8
Page 17
Hide quick links:
Advertisement
Table of Contents
