Battery-Module Replacement - Eaton 5PX 1000 RT2U Installation And User Manual

5. Maintenance

5.2 Battery-module replacement

Safety recommendations
The battery can cause electrocution and high short-circuit currents. The following safety precautions
are required before servicing the battery components:
p remove watches, rings, bracelets and all other metal objects from the hands and arms,
p use tools with an insulated handle.
Battery-module removal
Page 22
B
A
C
D
E
Remove the middle panel.
A
Remove the left-hand side of the front
B
panel by pushing the button and then
by sliding the part.
Disconnect the battery-module by
C
separating the town connectors
(never pull on the wires).
Remove the metal protection cover
D
in front of the battery (two screws).
Pull the plastic tab to remove
E
the battery block and replace it.
614-03797-00_EN