Connecting An External Network Relay; Operating Instructions; Machine Safety - Telair ENERGY 4010B User's Operating Instruction And Installation Manual

Table of Contents

Advertisement

Then put the hose code. 00,705 (Fig. 21 Ref 2)
Lock the output of the exhaust pipe with clamp
code.
01,655
Attach the hose (Fig. 21 Ref 2) to the terminal
input side of the muffler (Fig. 21 Ref 1) using the
other band that came on (Fig. 21 Ref 3).
Install the muffler 01761 using the appropriate
rubber suspenders.
Do not use silencers not
supplied by TELAIR Silencers that have not
been specially sized may damage the motor.

4.13 Connecting an External Network Relay

An (optional) relay or change-over switch code
05423 (Fig.28) should be fitted to the vehicle
wiring system. Its purpose is to insulate the
generating set when the vehicle is connected to
an external electric input network.
Connect the relay (Fig.29) according to the
following instructions:
Connect the two wires of the 230 V line of the
generating set to the PINS 1 - 3.
Connect the user line to the PINS 7 - 9.
Connect the outside line to the PINS 6 – 4.
Jumper the PINS 4 – A.
Jumper the PINS 6 – B.
Connect all the grounding cables together
16
(Fig.
21
Ref
Energy 4010 B
GB
the generating set should be carried out by
skilled electricians only.

5 OPERATING INSTRUCTIONS

delivered without engine oil.
Use detergent oil for multigrade 4-stroke
petrol engines, having SAE viscosity suitable
3).
for the operating climate (see table and
detailed
indications
maintenance manual of the engine).
ENERGY series generators consist of petrol
internal combustion engines connected to an
alternator that can produce both alternating and
direct electrical current. The generating sets are
assembled inside a steel plate casing, insulated
and
sound-proofed
absorbing materials.
Fuel is fed to the internal combustion engine via
a pump fitted to the generating set as part of the
standard supply.

5.1 Machine safety

The generating sets come with perfectly sealed
casings, so there is no danger of contact with any
moving or high temperature parts or with live
cables.
The doors open with a lock and key. The keys
must not be left within the reach of children or
inexperienced persons.
must only and exclusively be used with their
doors shut.
Remove
any
example: petrol, paints, solvents, etc.) from
near the generating sets.
Electric connections to
The generating set is
on
the
user
using
special
The
generating
flammable
substance
Vers. 001
and
sound
sets
(for

Advertisement

Table of Contents
loading

Table of Contents