The generating set will not
autonomously recharge the battery used for
starting-up unless this is connected to a
battery charger.
4.12 Connecting an additional silencer
To further reduce the generating set operating
noise, an (optional) additional silencer can be
installed externally.
The additional silencer kit code 03991 consists
of:
• A silencer code 01761 (Fig.21 Ref.1).
• Two metre long section of flexible steel tubing
code 00705 (Fig.21 Ref.2).
• Two connection fastening clamps code 01655
(Fig.21 Ref.3).
• Two rubber suspenders cod. 02,440 (Fig. 21
Ref 4).
To connect the silencer to the generating set, first
of all remove the door (Fig.22 Ref.2) by using the
special key (Fig.22 Ref.1) and the muffler guard
(Fig.22 Ref.3).
15
GB
Energy 4010 B
Vers. 022