Advertisement
Arming with the Remote Keyless
Entry Transmitter
Your alarm system will arm when you use your remote
keyless entry transmitter to lock the doors after the key
is removed from the ignition. The security light will
turn
on to let you know the system is arming. After all doors
are closed and locked, the security light will begin
flashing at
a
very slow rate to let you know the system
is armed.
Arming Confirmation
If remote unlock confirmation is on (see "Locks and
Lighting Choices" in the Index), your headlamps will
flash briefly to
let
you know when
your alarm
system.
has armed.
Disarming with the Remote Keyless
Entry Transmitter
Your alarm system will disarm when you use your
remote keyless entry transmitter to unlock
the doors.
The security light will stop flashing to let you know the
system is disarmed.
Disarming with Your Key
Your alarm system will disarm when
you use your
key
to unlock the doors. The security light will stop flashing
to let you know the system is disarmed. If you would
like your key to disarm the alarm system, see "Locks
and Lighting Choices" in the Index.
Nuisance Alarms
If you experience nuisance alarms (alarms which are
not caused by
the
opening of a door and are not
desirable), you may need to reduce the damage
detection sensitivity.
T r y
programming your Content
Theft-Deterrent to mode 1 (see "Locks and Lighting
Choices" in the Index). If you continue to experience
nuisance alarms, you may want to
try
turning off
damage detection by programming your Content
Theft-Deterrent to mode 2 (see "Locks and Lighting
Choices" in the Index).
If you are still having trouble with nuisance
alarms,
you
can turn off the Content Theft-Deterrent system by
programming your Content Theft-Deterrent to mode 3
(see "Locks
and Lighting Choices"
in the
Index).
See your dealer or a qualified technician for service.
Advertisement
