Advertisement
Shift Lock Release
If your vehicle's battery should go dead, there are two
override access slots (for the console shift) that will
allow you to override park lock.
1
1
The first is located
underneath the steering
column below the
lock cylinder.
1
To use this slot:
1. Remove the trim cap.
2. Insert a key or screwdriver into the access slot and
You will now be able to remove your key from the
ignition. Be sure to replace the trim cap after use. If your
vehicle has a column-mounted gear shift lever, you will
now be able to shift your vehicle out of
PARK (P).
press the lock cylinder.
For vehicles with center console-mounted gear shift
levers, the second access slot is located
on the upper,
right-hand side of the console shift panel. To use
this slot:
1.
Remove the cap with the words SHIFT LOCK
RELEASE on it.
2. Insert a screwdriver into the slot. Be careful not to
damage the cap.
3.
Press
down
and
hold.
You will now be able to shift your vehicle out of
PARK
(P)
.
2-25
Advertisement
