Advertisement
Delayed IlluminatiodExit Lighting
Your vehicle comes with this feature set in mode
4. To
change the factory setting while in the programming
mode do the following:
1.
Turn the interior lamps dial all the way to the right
and then back slightly to the left.
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set
for. You change the mode by turning the interior
lamps dial all the way to the right and then back
slightly to the left.
3. Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
Mode 1: Both Off (The interior lamps will turn on
or off
at the same instant that a door is opened or closed.)
Mode
2: Delayed Illumination Only (The interior lamps
will stay on for about 25 seconds after all the doors are
closed, or until you lock the doors.)
Mode 3: Exit Lighting Only (The interior lamps will
come on whenever you remove the key from the ignition
and
stay
on for about 25 seconds, or until you lock
the doors.)
Mode
4: Both On (This combines modes 2 and
3.)
Automatic Door Locks
Your vehicle comes
with
this
feature
set in mode
3. To
change the factory setting, while in
the
programming
mode do the following:
1. Press LOCK on the power lock switch.
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is set
for. You change the mode by pressing LOCK again.
3.
Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
Mode 1: Off (Automatic door locking and unlocking are
disabled.) You will always need to lock your door
manually while driving to increase occupant safety.
0
To
lock:
All doors will lock when you press the
power door lock switch or when you lock the vehic
using the remote keyless entry transmitter.
To unlock: All doors will unlock when you press the
power door lock switch again or when you press
UNLOCK on the remote keyless entry transmitter.
2-47
Advertisement
