Advertisement
Windshield Wipers
You
control the windshield wipers by
turning
the band
marked
WIPER.
For
a
single wiping cycle,
t u r n
the
band
to MIST. Hold it there until
the
wipers
start,
then let go.
The wipers
will stop
after
one cycle.
If you
want
more
cycles,
hold
the
band on MIST longer.
For steady wiping at low speed, turn the band to LOW.
For high-speed wiping, turn the band further, to HIGH.
To stop the wipers,
turn the band
to OFF.
You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain or
snow.
Turn
the band to choose the delay time. The
closer to LOW, the shorter the delay.
Be sure to clear ice and snow from the wiper blades
before using them. If they're frozen to the windshield,
carefully loosen or thaw them. If your blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload your wipers. A circuit
breaker will stop them until
the
motor cools. Clear away
snow or ice
to
prevent an overload.
2-36
Advertisement
