Advertisement
Remote Drivc Unlock Control
Y o u r
vehicle comes with this feature set in mode 2. To
change the factory setting while in the programming
mode, do the following:
1. Press UNLOCK on the remote keyless
entry transmitter.
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is set
for. You change the mode by pressing
UNLOCK again.
that matches the mode you want.
3. Repeat Step 2 until you hear the number of chimes
Mode 1: Remote All
Doors Unlock (When you press
UNLOCK on your remote keyless entry transmitter, all
doors will unlock.)
Mode 2 : Remote Driver's Door and All Doors Unlock
(When you press UNLOCK on your remote keyless
entry transmitter once, the driver's door will unlock.
If
you press UNLOCK again within five seconds, all doors
will unlock.)
Remote LocWUnlock Confirmation
Your vehicle comes with this feature set in mode
4. TO
change the factory setting while in the programming
mode do the following:
1. Press the LOCK button on the remote keyless
entry transmitter.
2.
Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle
is set
for. You change the mode by pressing LOCK on
your remote keyless entry transmitter again.
3. Repeat Step 2 until you hear the number of chimes
that matches the mode you want.
This feature provides feedback
to
the driver when the
vehicle receives a lockhnlock command from the
remote keyless entry transmitter. The fsllowing modes
may be selected:
Mode 1: Off (Remote lock and unlock confirmation
are disabled.)
Mode 2 : Remote Lock Confirmation with Exterior
Lamps Only Remote Lock Confirmation:
When you use the remote keyless entry transmitter to
lock your vehicle, your headlamps will flash briefly
to let you know your command is received.
Advertisement
