Advertisement
When the HUD is on, the speedometer reading will be
displayed continually. The current radio station or CD
track number will only be displayed for three seconds
after the radio or CD track status changes. This will
happen whenever one of the radio controls is pressed,
either on
the
radio itself or on the optional steering
wheel controls.
To adjust the HUD so you can see it properly:
1.
Start
your engine
and turn
the
DIM dial to
the
desired HUD image brightness.
2. Adjust your seat, if necessary, to a
comfortable position.
3. Press the top of the UP/DN switch until the HUD
image stops moving. Then press the bottom of the
switch until the image is as low as possible but in
full view.
4.
Turn the DIM dial down until the HUD image is no
brighter than necessary. To turn the HUD off, turn
the DIM dial all the way down.
If the sun comes out, it becomes cloudy, or if you turn
on
your headlamps, you may need
to
adjust the
HUD
brightness again. Polarizing sunglasses could make the
HUD image harder to see.
I
I
A
CAUTION:
If the HUD image is too bright, or too high in
your field of view, it may take more time to see
things you need to see when it's dark outside. Be
sure to keep the
HUD
image dim and placed low
in your field of view.
2-82
Advertisement
