Advertisement
NEXT
(2): Press
this button or the SEEK up arrow to
search for the next selection on the tape. If you hold the
button,
the
player will continue moving forward through
the tape. Your tape must have at least
three
seconds of
silence between each selection for NEXT or SEEK to
work. The tape direction arrow blinks during NEXT or
SEEK operation. Press NEXT or the SEEK up arrow to
stop searching. The sound will mute during NEXT or
SEEK operation.
PROG (3): Press this button to play the other side
of the tape.
00
(4): Press this button to reduce background
noise. Note that the double-D symbol will appear
on the display.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and
the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
REV
(5): Press
this button to reverse the tape rapidly.
Press it
again
to
return
to
playing speed.
The
radio
will
play the last-selected station while the tape reverses.
You
may select stations during REV operation by using
SEEK or
TUNE.
FWD (6):
Press this button to advance quickly to
another part
of
the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances. You may select stations
during
FWD
operation by using SEEK or TUNE.
AM-FM: Press this button to play the radio when a tape
is in the player.
TAPEPLAX Press this button to change to the tape
function when the radio is on. The tape symbol with an
arrow will appear on the display when the tape is active.
To return to playing the radio, press the
AM-FM
button.
EJECT: Press this button to remove the tape. The radio
will play. EJECT may be activated with
either the
ignition or radio off. Cassettes may be loaded with the
radio off if this button is pressed fist.
CLN:
If this message appears on the display, the
cassette tape player needs to be cleaned. It will still play
tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See "Care of
Your
Cassette Tape Player"
in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the CLN indicator. The radio will display
---
to
show the indicator was reset.
3-18
Advertisement
