Advertisement
Windshield Wipers
The windshield wiper motor is protected by a circuit
breaker and a fuse. If the motor overheats due to heavy
snow, etc., the wiper will stop until the motor cools.
If
the overload is caused by some electrical problem, have
it fixed.
Power Windows and Other Power Options
Circuit breakers in the fuse panel protect the power
windows and other power accessories. When the current
load is too heavy, the circuit breaker opens and closes,
protecting the circuit until the problem is fixed.
Instrument Panel Fuse Block
Some fuses are in a fuse block located inside of the glove
box behind a small bin, on the right side. To open, pull on
the plastic strap
and
pull the cover out. The fuse block is
inside. On the back edge of this cover is a fuse puller and
a
fuse
usage chart.
T o
use
the
fuse puller, place the wide
end of the fuse puller over the plastic end
of the
fuse.
Squeeze the ends over the fuse and pull it
out.
To reinstall the bin, position the lower end and turn
the top into position. Press on the sides until
it snaps
into place.
6-63
Advertisement
