Dualit 72960 Instruction Manual page 6

Pour over kettle
Hide thumbs Also See for 72960:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
water.
D
o not move the kettle while it is switched on.
D
o not remove or open the lid while the
water is heating
• Use handles or knobs – do not touch hot
surfaces.
I
f the kettle is overfilled, hot water may be
ejected.
W
hen heating, hot steam will be emitted
from the kettle. Scalding will occur if you are
within 400mm of the Lid, Spout or Steam
Vents either side of the lid.
• Ensure that the kettle Spout is pointing away
from any electrical plug or socket.
S
calding will occur if the Lid is opened during
the heating cycle and the body of the kettle
will get hot.
T
his kettle features boil-dry protection. If
the kettle is accidently switched on without
water, the boil-dry device will switch off
the heating element to prevent damage to
the kettle. Wait approximately 10 minutes
for the kettle to cool down, lift and refill as
normal. The kettle is now ready to use again.
NOTE: If discolouration of the heating plate
has occurred, this can be easily removed by
descaling your kettle.
T
ake care when pouring – pour slowly and do
not over-tilt the kettle.
W
ater will remain hot for a considerable
time after heating and can present a scald
hazard. Keep the kettle, Power Base and the
mains lead away from the edge of worktops
and out of the reach of children. CAUTION:
This kettle has a hold function which
will maintain the temperature for a
further 5 minutes after reaching target
temperature. Risk of scalding. Keep out
DON'T FORGET
TO REGISTER
YOUR PRODUCT
A
A
T
U
C
D
• Use the kettle only with the Power Base
T
A
D
SAVE THESE
INSTRUCTIONS
Unpack the box with care, keeping all the
packaging materials until you are satisfied
everything is present and in working order.
WWW.DUALIT.COM/REGISTER
OR BY POST
6
of reach of children.
void spilling of any liquid on the connector.
llow the kettle to cool down completely
before cleaning and storing.
o disconnect, remove plug from wall outlet.
nplug the Power Base from the wall socket
when not in use, or before moving and
cleaning.
AUTION: To prevent damage to the
appliance, do not use alkaline cleaning agents.
When cleaning, use a soft cloth and a mild
detergent.
o not use scouring pad or abrasive cleaner
on the appliance body.
supplied and vice versa.
he use of accessory attachments not
recommended by Dualit may result in fire,
electric shock or injury to persons.
short Power Cord is provided to reduce
risks resulting from becoming entangled in or
tripping over a longer cord.
o not heat the kettle if filled with
descaling solution.
Once satisfied remove any tags
from the appliance body and
recycle the packaging appropriately.
Do not remove tags from the
cord. You may wish to keep the
box to store your appliance.

Advertisement

Table of Contents
loading

Table of Contents