HERO MAESTRO EDGE Manual page 68

3
(1) Fuel drain tube(2) Guide (3) Screws
Install a new tail/stop lamp unit in the
î
reverse order of removal.
Rear turn signal bulb
Insert hand from body cover rear side,
î
above rear fender area and remove turn
signal bulb holder (1) by turning counter
clockwise.
Remove the bulb (1) by turning it to
î
counterclockwise direction.
(1) Bulb holder (2) Rear turn signal lamp bulb
1
1
2
Install a new bulb in the reverse order of
î
removal.
Front turn signal bulb
Insert hand from body cover front side,
î
above front fender area and remove turn
2
signal bulb holder (1) by turning counter
clockwise.
Remove the bulb (1) by turning it to
î
counterclockwise direction.
(1) Front turn signal lamp bulb
Install a new bulb in the reverse order of
î
removal.
CLEANING
Clean your scooter regularly to protect the
surface finishes and inspect for damage, wear
and oil leakage.
Avoid cleaning products that are not
specifically designed for scooter or automobile
surfaces. They may contain harsh detergents
or chemical solvents that could damage the
metal, paint and plastic parts on your scooter.
65
1