Table of Contents
Advertisement
Problem
The reset
does not
work.
Full Two-Year Warranty
Philips Japan warrant this new product against
defects in materials or workmanship for a period
of two years from the date of purchase, and
agree to repair or replace any defective product
without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, or the affixing of
any attachment not provided with the product or
loss of parts or subjecting the product to any but
the specified voltage or bateries.*
Possible cause / solution
The long press was too short (<5 seconds).
Press and hold the activation button for five
seconds, until you see the countdown (3-2-
1) on the display and feel a vibration. Keep
pressing even when you see '- - 'on the
display (after 2 seconds of long pressing).
The final vibration indicates that the reset
was successful. The adaptation phase is now
active again.
The sensor is off or the sensor is in a sleep
session '- -'. The long press (five seconds)
only works when the display is active and
shows one of the sensor data screens (see
'Sensor data').
43
English
Advertisement
Table of Contents
