Table of Contents
Advertisement
Automatic pause mode
the first 30 minutes of a sleep session
the sensor will not vibrate. Once the 30
minutes have passed, the sensor will
vibrate when you are lying on your back.
- A sleep session can last up to 12 hours.
After 12 hours the sensor automatically
stops the sleep session and switches off.
- If a sleep session has been stopped and
started again within a two hour timespan,
both sessions are counted as one full
sleep session.
A sleep session is automatically paused,
when the sensor detects you sat up or got
out of bed (vertical position). After you lie
down again, the sensor will not vibrate
for the first 30 minutes to allow you to fall
asleep. Once the 30 minutes have passed,
the sensor encourages you to turn from
your back to your side.
Temporarily interrupt vibrations
If the sleep session is active and you are
awake and lying on your back, but you
do not want the sensor to vibrate at that
moment, tilt the sensor to a vertical position
and back to start the automatic pause
mode. The pause mode is not shown in the
sensor data.
31
English
Advertisement
Table of Contents
