Philips SmartSleep SP3710/15 Manual page 25

Table of Contents

Advertisement

English
another adapter may jeopardize system safety.
- If the adapter and/or USB cord is damaged or defective,
always seek a replacement from Philips in order to avoid a
hazard (see 'Accessories').
- The sensor contains a non-replaceable Lithium battery.
- Do not open the sensor, there are no serviceable parts
inside. It will void warranty and may induce a battery
related hazard.
- Do not dispose of batteries in fire or extreme heat.
Batteries may explode or leak.
CAUTION
- The sensor is not washable. Never immerse the sensor in
water or rinse it under the tap.
- Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol or
acetone to clean the Snoring Relief Band.
- Check if the voltage indicated on the adapter corresponds
to the local mains voltage before you connect the adapter.
- Do not use the adapter in or near wall sockets that contain
or have contained an electric air freshener to prevent
irreparable damage to the adapter.
- Use and store the product under the right environmental
conditions as indicated in this user manual (see
'Specifications '). If not, this could affect the performance
and lifetime of the product.
- The strap should feel snug but comfortable below your
chest.
- Reset the sensor if you intend to change the user as the
sensor has a self-learning algorithm which is optimized to
your personal sleep behavior.
24

Advertisement

Table of Contents
loading

Table of Contents