Field Verification Device Settings
Time
1 Select StartMenu > Settings > Misc > Time
2 Edit the hour and minutes in the edit box by using the numeric keypad Use ► to move the cursor
3 Press Right Select to confirm the new time
Contrast
Adjust the contrast of the display using ◄ ► ▲ and ▼ and press Right Select to confirm the new setting
Flow Meter Modbus Address
1 Select StartMenu > Settings > FM Modbus Address
2 Edit the Address in the edit box by using the numeric keypad Use Back/Delete to remove the last number position
3 Press Right Select to confirm the new address
4 Be sure that the flow meter is programmed with the same modbus address or communication will fail The default address
is 1
August 2021
MAG-UM-00368-EN-03
Page 15