Learn To Use The Treadmill - LifeSpan LFT 05 WalkingPad M2 User Manual

VI. LEARN TO USE THE TREADMILL
1. MODE DESCRIPTION
Manual Mode
Light of the manual mode is
on; Control the speed through
the remote control or APP.
2. Instructions of the Standby Mode Control
The motor and sensor stop responding in this
mode to prevent non-users from accidentally
triggering the WalkingPad.
3. MANUAL MODE CONTROL DESCRIPTION (PRIMARY MODE)
Manual Mode
In this mode, users can use the remote control
to control the treadmill. Beginners are advised
to use the manual mode first, and then use the
automatic mode once skills have increased.
12

| LEARN TO USE THE TREADMILL

Automatic Mode
Light of the automatic mode is on;
Speed is automatically controlled
by intelligent algorithm. It follows
the speed of walking.
Mode Switch
Short Press: Return to the previous mode.
Mode Button
Short press: Switches mode
Long press: Switch to standy mode
(not in use)
Speed Increase Button
Short press: Speed increase by
0.5km/h (0.5mi/h)
Function Button
Short press: Starts or stops the
treadmill
Speed Decrease Button
Short press: Speed decrease by
0.5km/h (0.5mi/h)