Settings Tab - Ricoh Ri 2000 User Manual

1. Before You Begin

Settings Tab

1
2
1.
[INK PATH CONTROL]
Performs the ink path control. If you press this button, you can flush the printer. For details, see page
165, "Ink Path Guide".
2.
[OPTION]
You can change the following settings via the Option screen.
Setting
[IP ADDRESS]
[DRYING TIME]
[HEIGHT SETTING]
[TEMPERATURE]
[HIGH SPEED MODE]
[WHITE CLEAN FREQ.]
[LANGUAGE]
[STORED JOB]
[FACTORY RESET]
[VOLUME]
Set print IP address.
Set time between white layer printing and CMYK printing.
Set the gap between the print head and the platen for HEIGHT
ADJUSTMENT.
When set to "Normal", the gap is narrowed and the image quality
is improved, but the detection for the unevenness of the garment
is more sensitive. The gap becomes wider in the order of "rough"
and "very rough", and the image quality deteriorates, but the
detection for the unevenness of the garment becomes less
sensitive.
Can display temperature in Celsius or Fahrenheit.
Can set white layer to high speed mode – not recommended
though because of the ink mist.
See page 140, "Circulation".
Select the display language.
If selected, jobs in internal memory will be deleted after a selected
# of days, the default is this is tuned off so jobs are not deleted.
Set Head. Table and print alignment to original settings.
Set volume of buzzer
41
RICOH Ri 2000 User Manual
3
Description