Ricoh Ri 2000 User Manual page 146

4. Adjustments
4.
When there are no straight vertical side lines, as shown in the upper illustration,
check the last square out of the sequence of squares with the smallest gap in the
side lines and then find a corresponding value.
In the upper illustration, the value is "+4".
After you enter a value for all the rows, press [ALIGN] that sets the new values.
Print the pattern again and repeat the above process.
Repeat the process until all rows (A, B, C, etc.) show the 0 column or close to the
0 column as the best value.
NOTE - You can always reset to the original settings by pressing [FACTORY RESET] by going to the
Settings tab and pressing [OPTION].
146
RICOH Ri 2000 User Manual