Description Of The Control Panel; Material Selection - sauter TD 225-0.1US. Instruction Manual

3. Description of the control panel

4. Material selection

1. Switch on the device with the power button 3-4.
2. Select the material to be tested by pressing the material selection button 3-5,
the display
'cd' is the abbreviation for code and 'xxx' is a number between 01 and 11, which,
in the table below, stands for the material to be measured. `xxxx` is a 4-
digit number indicating the sound velocity for the material selected by the user.
The 'cdxx' material relationship is as follows:
No Code Material
.
1 cd01 Steel
2 cd02 Cast Iron
3 cd03 Aluminium
4 cd04 Copper
5 cd05 Brass
6 cd06 Zinc
7 cd07 Quartz glass
8 cd08 Polyethylene
9 cd09 PVC
10 cd10 Grey cast iron
11 cd11 Ductile Cast Iron
12 xxxx Sound velocity
4
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9 Minus
3-10 Battery compartment / cover
3-11 Display "Measuring process is
running
3-12 Zero plate
3-13 Speed selection key
3-14 Connector for RS-232C connection
3-2 will show
Sensor plug
Display
mm/ inch button
On and Off Button
Material selection button
Plus key
Ultrasonic measuring head
Calibration key (adjustment)
button
the code 'cdxx' or 'xxxxx'.
TD_US-BA-e-2020