Checking The Opcomp - Siemens MAMMOMAT 300 Installation And Start-Up Instructions Manual

Checking the compression device and OPCOMP
Checking the OPCOMP (Option)
See Figure 1
1 Decompress.
2 Set the compression force to 20 kg by using the presetting knob (5) and compress.
The compression movement must be interrupted by OPCOMP before 20 kg is
reached, i.e. at 5-15 kg depending on the material (4) used.
Siemens-Elema AB
Solna, Sweden
SPS-UD RX B7-120.033.01.10.02
05.98
16-3
MAMMOMAT 300
65 02 186