Troubleshooting
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:
•
From the printer control panel, touch Continue to clear the message.
•
Delete other held jobs to free up additional printer memory.
Load [paper source] with [custom string] [paper orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper, and then touch Finished loading paper
on the control panel.
•
Touch Reset active bin to reset the active bin for a linked set of bins.
•
Cancel the current job.
Load [paper source] with [custom type name] [paper orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper, and then touch Finished loading paper
on the control panel.
•
Touch Reset active bin to reset the active bin for a linked set of bins.
•
Cancel the print job.
Load [paper source] with [paper size] [paper orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size of paper, and then touch Finished loading paper on the
control panel.
•
Touch Reset active bin to reset the active bin for a linked set of bins.
•
Cancel the current job.
Load [paper source] with [paper type] [paper size] [paper orientation]
Try one or more of the following:
•
Load the specified tray or feeder with the correct size and type of paper, and then touch Finished
loading paper on the control panel.
•
Touch Reset active bin to reset the active bin for a linked set of bins.
•
Cancel the current job.
Load multipurpose feeder with [custom string] [paper orientation]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, touch Prompt each page, paper loaded or Do not prompt, paper loaded
to clear the message and continue printing.
297