Table of Contents
Advertisement
No.
Component
6
Power Sockets
7
Primary LAN Port
8
Serial Port
9
Remote Console
Port
10
Local Console
Port(s)
The power cable(s) plugs in here. The left power socket
corresponds to the left power switch, and the right power
socket corresponds to the right power switch.
The cable that connects the unit to the primary network
interface (10/100/1000 Mbps) plugs in here.
This port can be used for a serial device; or for a dial in
connection should the unit be unavailable over the network.
See RCM Series Single Stage Installation on page 23, step
7 for installation details.
This port is reserved and will be available for use with
future upgrades as a remote console port.
The unit can be accessed via a local console as well as
over the Net. The local console devices (USB keyboard,
USB mouse, DVI-D or VGA monitor) plug in here.
Chapter 1. Introduction
Description
15
Advertisement
Table of Contents
