ATEN RCM416 User Manual page 87

3. Click Record.
The dialog box disappears, and a small panel appears at the top left of the
screen:
4. Press the keys for the macro.
 To pause macro recording, click Pause. To resume, click Pause again.
 Clicking Show brings up a dialog box that lists each keystroke that you
make, together with the amount of time each one takes (see page 71).
 When recording the macro the focus must be on the remote screen. It
cannot be in the macro dialog box.
Note: 1. Case is not considered – typing A or a has the same effect.
2. Only the default keyboard characters may be used. Alternate
characters cannot be used. For example, if the keyboard is
Traditional Chinese and default character is A the alternate
Chinese character obtained via keyboard switching is not
recorded.
Chapter 5. The User Interface
71