Chapter 8. Device Management
OOBC
In case the KVM over IP switch cannot be accessed with the usual LAN-based
methods, it can be accessed via the switch's modem port. To enable support for
PPP (modem) operation, click to put a checkmark in the Enable Out of Band
Access checkbox. The OOBC tab and options are only available for KVM over
IP switches with a serial port.
Note: See PPP Modem Operation, page 263, for PPP setup and operation.
When you enable Out of Band Access, the Enable Dial Back, and Enable Dial
Out functions become available, as described in the sections that follow.
169