ATEN RCM416 User Manual page 187

Item
Emergency Dial
If the KVM over IP switch gets disconnected from the network, or the
Out
network goes down, this function puts the switch on line via the ISP
dial up connection.


Dial Out Mail This section provides email notification of problems that occur on
Configuration
the devices connected to the KVM over IP switch's ports (see SMTP
Settings, page 161).
Note: This email notification differs from the one configured under
SMTP Settings, page 161, in that it uses the ISP mail server rather
than the internal company's mail server.





When you have finished making your settings on this page, click Save.
If you choose PPP stays online until network recovery, the PPP
connection to the ISP will last until the network comes back up or
the switch reconnects to it.
If you choose PPP online time, the connection to the ISP will
terminate after the amount of time that you specify is up. A setting
of zero means it is always on line.
Key in the IPv4 address, IPv6 address, or domain name of your
SMTP server in the SMTP Server IP Address field.
Key in the email address of the person responsible for the SMTP
server (or some other equally responsible administrator), in the
Email From field.
Key in the email address (addresses) of where you want the
report sent to in the To field. If you are sending the report to more
than one email address, separate the addresses with a comma or
a semicolon.
If your server requires a secure SSL connection, put a check in
the SMTP server requires secure connection (SSL) checkbox
If your server requires authentication, put a check in the SMTP
server requires authentication checkbox, then key in the
appropriate account name and password in the fields, below.
Chapter 8. Device Management
Action
171