Information; Remote Code; Lamp Reset - JVC DLA-X9900BE Instructions Manual

Remote Code

For changing the remote control code.
Setting
A
B
You need to configure the remote control according to the settings of this unit.
0
On the remote control unit, press the [MENU] and [BACK] buttons at the same time for three seconds or longer to
switch the code.
The backlight of the remote control blinks 3 times: change the remote control code to "A"
0
The backlight of the remote control blinks 2 times: change the remote control code to "B"
0

Lamp Reset

For resetting the lamp time to "0".
Æ "Resetting the Lamp Time" (P. 62)

Information

Setting
Input
Source
(Displayed only during video signal input)
Resolution
(Displayed only during PC signal input)
H Frequency
(Displayed only during PC signal input)
V Frequency
(Displayed only during PC signal input)
Color Depth
Color Space
Colorimetry
HDR
Max CLL / Max FALL
Lamp Time
Soft Ver.
Change the remote control code from "B" to "A".
Change the remote control code from "A" to "B".
Displays video input terminal.
Displays the input source.
Displays the image resolution.
Displays the horizontal frequency.
Displays the vertical frequency.
Displays the color space and color bit depth of the input video signal.
The color bit depth is not displayed when YCbCr (4:2:2) is input.
0
The color bit depth is displayed when color bit depth information is received
0
from the source device.
Displays the colorimetry of the input video signal.
Displays the EOTF information when HDR packet is received.
Displays the mastering information of the contents during HDR playback.
Max CLL: Maximum Content Light Level
Max FALL: Maximum Frame Average Light Level
The information may not be displayed depending on the player and contents.
0
Displays the lamp time.
Displays the firmware version.
Description
Description
59